Adafruit Pro Trinket - 5V 16MHz - compatible with Arduino

SKU: ada-2000
MPN: 2000
EAN / Barcode: 4060137021244
Lieferfrist: Sofort versandfertig, Lieferfrist 1-2 Tage

Preis:
Angebotspreis15,39 €

Inkl. Steuern Versand wird an der Kasse berechnet

Lager:
Auf Lager

Beschreibung

BESCHREIBUNG

  • Die Pins #2 und #7 sind nicht verfügbar (sie sind ausschließlich für USB vorgesehen)
  • Der eingebaute 5V-Regler kann 150mA ausgeben, nicht 800mA
  • Sie können keine Shields direkt an das Pro Trinket anschließen
  • Es ist kein Seriell-zu-USB-Chip an Bord. Um das Pro Trinket klein und preiswert zu halten, können Sie ein beliebiges FTDI-Kabel verwenden, um eine serielle Verbindung herzustellen. Die USB-Verbindung ist nur zum Hochladen von neuem Code gedacht.
  • Der Bootloader auf dem Pro Trinket verwendet 4KB FLASH, so dass die maximale Sketchgröße 28.672 Bytes beträgt. Der Bootloader hat keinen Einfluss auf die RAM-Nutzung.
  • ATmega328P Onboard-Chip im QFN-Gehäuse
  • 16MHz Taktrate, 28K FLASH verfügbar
  • USB-Bootloader mit einer netten LED-Anzeige sieht aus wie ein USBtinyISP, so dass man ihn mit AVRdude und/oder der Arduino-IDE programmieren kann (mit ein paar einfachen Konfigurationsänderungen).
  • Hat auch Header für einen FTDI-Port zur Neuprogrammierung
  • Micro-USB-Buchse für die Stromversorgung und/oder das Hochladen über USB. Sie können ihn in eine Box stecken oder mit Klebeband befestigen und ein beliebiges USB-- Kabel verwenden, wenn Sie ihn neu programmieren wollen.
  • Integrierter 5,0-V-Stromregler mit 150 mA Ausgangsleistung und extrem niedrigem Dropout. Bis zu 16 V Eingangsspannung, Verpolungsschutz, Schutz vor Überhitzung und Strombegrenzung.
  • Stromversorgung entweder über USB oder über einen externen Ausgang (z. B. eine Batterie) - es wird automatisch umgeschaltet
  • Integrierte grüne Power-LED und rote LED für Pin #13
  • Reset-Knopf zum Aufrufen des Bootloaders oder zum Neustart des Programms.
  • Funktioniert mit 99% der existierenden Arduino-Skizzen (alles, was nicht mehr als 28K benötigt und die Pins #2 und #7 nicht benötigt)
  • Befestigungslöcher! Ja!

DESCRIPTION

Trinket's got a big sister in town - the Pro Trinket 5V! Pro Trinket combines everything you love about Trinket with the familiarity of the common core Arduino chip, the ATmega328. It's like an Arduino Pro Mini with more pins and USB tossed in, so delicious.

Trinket's a year old now, and while its been great to see tons of tiny projects, sometimes you just need more pins, more FLASH, and more RAM. That's why we designed Pro Trinket, with 18 GPIO, 2 extra analog inputs, 28K of flash, and 2K of RAM.

Like the Trinket, it has onboard USB bootloading support - Adafruit opted for a MicroUSB jack this time. They also added Optiboot support, so you can either program your Pro Trinket over USB or with a FTDI cable just like the Pro Mini and friends.

The Pro Trinket PCB measures only 1.5" x 0.7" x 0.2" (without headers) but packs much of the same capability as an Arduino UNO. So it's great once you've finished up a prototype on an official Arduino UNO and want to make the project smaller.

The Pro Trinket 5V uses the Atmega328P chip, which is the same core chip in the Arduino UNO/Duemilanove/Mini/etc. at the same speed and voltage. So you'll be happy to hear that not only is Pro Trinket programmable using the Arduino IDE as you already set up, but 99% of Arduino projects will work out of the box!

For tons more details, check out the Introducing Pro Trinket tutorial

Here's some things you may have to consider when adapting Arduino sketches:

  • Pins #2 and #7 are not available (they are exclusively for USB)
  • The onboard 5V regulator can provide 150mA output, not 800mA out
  • You cannot plug shields directly into the Pro Trinket
  • There is no Serial-to-USB chip onboard. This is to keep the Pro Trinket small and inexpensive, you can use any FTDI cable to connect to the FTDI port for a Serial connection. The USB connection is for uploading new code only.
  • The bootloader on the Pro Trinket use 4KB of FLASH so the maximum sketch size is 28,672 bytes. The bootloader does not affect RAM usage.

Here's some handy specifications:

  • ATmega328P onboad chip in QFN package
  • 16MHz clock rate, 28K FLASH available
  • USB bootloader with a nice LED indicator looks just like a USBtinyISP so you can program it with AVRdude and/or the Arduino IDE (with a few simple config modifications).
  • Also has headers for an FTDI port for reprogramming
  • Micro-USB jack for power and/or USB uploading, you can put it in a box or tape it up and use any USB cable for when you want to reprogram.
  • On-board 5.0V power regulator with 150mA output capability and ultra-low dropout. Up to 16V input, reverse-polarity protection, thermal and current-limit protection.
  • Power with either USB or external output (such as a battery) - it'll automatically switch over
  • On-board green power LED and red pin #13 LED
  • Reset button for entering the bootloader or restarting the program.
  • Works with 99% of existing Arduino sketches (anything that doesn't use more than 28K, and doesn't require pins #2 and #7)
  • Mounting holes! Yeah!

 

Dimensions:

  • 38mm x 18mm x 2mm / 1.5" x 0.7" x 0.08"
  • Height with MicroUSB: 4mm / 0.16"
  • Weight: 2.6g

Datasheets, documents, Fritzing objects, PCB files and more are in the tutorial

 

Contains ONLY the Pro Trinket, all other Items shown in the Pictures are for the purpouse of demonstration only.

Benötigen Sie Beratung oder ein Angebot zu diesem Artikel?

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Zuletzt gesehen