1.3" SPI Colour LCD (240x240) Breakout

SKU: PIM476
EAN / Barcode:
Lieferfrist: Sofort versandfertig, Lieferfrist 1-2 Tage

Preis:
Angebotspreis18,69 €

Inkl. Steuern Versand wird an der Kasse berechnet

Lager:
Auf Lager

Beschreibung

Ein Produkt von Pimoroni

Die quadratische Form dieses Displays eignet sich hervorragend, um viele Informationen darauf unterzubringen - Daten, Diagramme und sogar Dinge wie Albumcover und Fotos. Wie Pimoronis kleineres 0,9"-LCD-Breakout ist auch dieses ein IPS-Display, hat also tolle Betrachtungswinkel und ist superscharf und hell.


Es wird über SPI angesteuert und man sollte in der Lage sein, es mit bis zu ~50FPS zu betreiben, obwohl Pimoroni herausgefunden hat, dass ein Wert von 10FPS für die meisten Anwendungen gut aussieht.

Sie können dieses Breakout komplett lötfrei mit unserem Breakout Garden HAT mit SPI verwenden!

Merkmale

  • 1,3" Farb-LCD (240x240 Pixel)
  • SPI-Schnittstelle
  • 3,3V oder 5V kompatibel
  • Schutz vor Verpolung
  • Kompatibel mit allen Modellen von Raspberry Pi und Arduino
  • Python-Bibliothek
  • Display-Spezifikationen
  • 240x240 Pixel (~260 PPI)
  • 23.4x23.4mm aktive Fläche
  • 250m2 Leuchtdichte
  • 800:1 Kontrastverhältnis
  • 160° Betrachtungswinkel (horizontal und vertikal)
  • ST7789V-Treiber-Chip

Software

Wir haben eine bestehende Python-Bibliothek angepasst, um dieses Display anzusteuern. Die Bibliothek macht es einfach, Bilder, Text oder Grafiken anzuzeigen und sogar animierte GIFs darzustellen!

Anschließen an Ihren Raspberry Pi

Wenn Sie kein Pimoronis Breakout Garden HAT mit SPI verwenden, können Sie Ihr LCD Breakout folgendermaßen an Ihren Raspberry Pi anschließen.

Pimoronis Python-Bibliothek ist so eingestellt, dass sie standardmäßig SPI 1 auf dem Pi verwendet (BCM 7 für CS, BCM 11 für SCK und BCM 10 für MOSI), BCM 9 für DC und BCM 19 für die Hintergrundbeleuchtung.

Hier sind die Pins, die Sie zwischen Ihrem 0,96"-LCD-Breakout und dem GPIO Ihres Pi anschließen müssen (beachten Sie, dass es sich um die BCM-Pin-Nummerierung handelt):

  • 3-5V an einen beliebigen 5V- oder 3V-Pin
  • CS an BCM 7
  • SCK an BCM 11
  • MOSI an BCM 10
  • DC an BCM 9
  • BL an BCM 19
  • GND an einen beliebigen Masse-Pin

Sie können natürlich auch andere Pins mit Ihrem LCD-Breakout verwenden, aber Sie müssen sie entsprechend ändern, wenn Sie das Display in Ihrem Code instanziieren.

Anmerkungen
Abmessungen: 41.2x26.6x5.5mm

 

A product by Pimoroni

The square form-factor of this display makes it great for cramming lots of information on—data, graphs, even things like album art and photos. Like our smaller 0.9" LCD breakout, this one is an IPS display, so it has great viewing angles and it's super-crisp and bright.

It's driven by SPI and you should be able to run it at up to ~50FPS, although we've found that anywhere from 10FPS looks good for most uses.

You can use this breakout completely solder-free with our Breakout Garden HAT with SPI!

Features

  • 1.3" colour LCD (240x240 pixels)
  • SPI interface
  • 3.3V or 5V compatible
  • Reverse polarity protection
  • Compatible with all models of Raspberry Pi and Arduino
  • Python library

Display specifications

  • 240x240 pixels (~260 PPI)
  • 23.4x23.4mm active area
  • 250m2 luminance
  • 800:1 contrast ratio
  • 160° viewing angle (horizontal and vertical)
  • ST7789V driver chip

    Software

    We've adapted an existing Python library to drive this display. The library makes it straightforward to display images, text or graphics, and even display animated GIFs!

    Connecting to your Raspberry Pi

    If you're not using our Breakout Garden HAT with SPI, then this is how to connect your LCD Breakout up to your Raspberry Pi.

    Pimoronis Python library is set up to use SPI 1 by default on the Pi (BCM 7 for CS, BCM 11 for SCK, and BCM 10 for MOSI), BCM 9 for DC, and BCM 19 for the backlight.

    Here's which pins to connect between your 0.96" LCD Breakout and your Pi's GPIO (note that it's BCM pin numbering):

    • 3-5V to any 5V or 3V pin
    • CS to BCM 7
    • SCK to BCM 11
    • MOSI to BCM 10
    • DC to BCM 9
    • BL to BCM 19
    • GND to any ground pin

      You can of course use other pins with your LCD Breakout, but you'll have to change them accordingly when you instantiate the display in your code.

      Notes

      Dimensions: 41.2x26.6x5.5mm

          Benötigen Sie Beratung oder ein Angebot zu diesem Artikel?

          Customer Reviews

          No reviews yet
          0%
          (0)
          0%
          (0)
          0%
          (0)
          0%
          (0)
          0%
          (0)

          Zuletzt gesehen