Raspberry Pi Debug Probe

SKU: RP-SC0889-DebugProbe
EAN / Barcode: 5056561803265
Lieferfrist: Sofort versandfertig, Lieferfrist 1-2 Tage

Preis:
Angebotspreis13,79 €

Inkl. Steuern Versand wird an der Kasse berechnet

Lager:
Auf Lager

Beschreibung

Die Raspberry Pi Debug Probe ist eine preiswerte, all-in-one USB-zu-seriell Debug- und UART-Bridge. Sie bietet die notwendige Hardware und Verkabelung, um das "Plug-and-Play"-Debugging von Raspberry Pi Pico und anderen Mikrocontroller- und Mikroprozessor-basierten Plattformen zu unterstützen.

Die Raspberry Pi Debug Probe bietet sowohl eine serielle Debug-Schnittstelle für den Prozessor (standardmäßig ist dies die ARM Serial Wire Debug-Schnittstelle) als auch eine UART-Schnittstelle nach Industriestandard. Beide Schnittstellen verwenden einen 3-Pin-Debug-Anschluss, wie in der Spezifikation des Raspberry Pi 3-Pin-Debug-Anschlusses angegeben.

Die Raspberry Pi Debug Probe wird als Kit geliefert, das die Sondenhardware in einem Kunststoffgehäuse und einen Kabelsatz enthält: ein USB-Kabel und drei verschiedene Arten von Debug-Kabeln, um die meisten Anwendungsfälle abzudecken. Die Debug Probe wurde zwar in erster Linie für die Verwendung mit Raspberry Pi-Debug-Targets entwickelt, bietet aber Standard-CMSIS-DAP-Debug- und UART-Schnittstellen über USB; sie kann daher auch zum Debuggen anderer Targets oder einfach als kostengünstiges USB-zu-UART-Kabel verwendet werden. Die Raspberry Pi Debug Probe basiert auf dem Raspberry Pi Pico Hardware-Design und läuft mit der Open-Source-Software Raspberry Pi Picoprobe [https://github.com/raspberrypi/picoprobe]. Die Aktualisierung der Firmware erfolgt auf die gleiche Weise wie bei einem Raspberry Pi Pico, so dass es einfach ist, das Gerät mit der neuesten Picoprobe-Firmware auf dem neuesten Stand zu halten oder eine eigene Firmware zu verwenden.

Weitere Informationen

Das Kit enthält: 

  • Raspberry Pi Debug Probe
  • Kunststoffgehäuse 
  • 1x USB-Kabel
  • 3x verschiedene Arten von Debug-Kabeln

English description

The Raspberry Pi Debug Probe is an inexpensive, all-in-one USB to serial debug and UART bridge. It provides the necessary hardware and cabling to support “plug and play” debugging of Raspberry Pi Pico and other microcontroller- and microprocessor-based platforms. The Raspberry Pi Debug Probe provides both a processor serial debug interface (by default this is the ARM Serial Wire Debug interface) and an industry-standard UART interface. Both interfaces use a 3-pin debug connector, as specified in the Raspberry Pi 3-pin debug connector specification.

The Raspberry Pi Debug Probe is provided as a kit, containing the probe hardware in a plastic case, and a set of cables: a USB cable, andthree different types of debug cable to  cover the vast majority of use cases. While it has been designed primarily for use with Raspberry Pi debug targets, the Debug Probe provides standard CMSIS-DAP debug and UART interfaces over USB; it can therefore be used to debug other targets, or simply as a cost-effective USB-to-UART cable. The Raspberry Pi Debug Probe is based on the Raspberry Pi Pico hardware design and runs the open-source Raspberry Pi Picoprobe software [https://github.com/raspberrypi/picoprobe]. Updating the firmware is accomplished in the same way as on a Raspberry Pi Pico, so it is straightforward to keep the unit up to date with the latest Picoprobe firmware, or to use a custom firmware.

Further information

The kit contains:

  • Raspberry Pi Debug Probe
  • Plastic case
  • 1x USB cable
  • 3x different types of debug cables

Benötigen Sie Beratung oder ein Angebot zu diesem Artikel?

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Zuletzt gesehen