7'' Display für den Raspberry Pi mit Touchscreen

SKU: RP-SC0025 - Display
MPN: RASPBERRYPI-DISPLAY
EAN / Barcode: 0640522710386
Lieferfrist: Sofort versandfertig, Lieferfrist 1-2 Tage

Preis:
Angebotspreis69,59 €

Inkl. Steuern Versand wird an der Kasse berechnet

Lager:
Auf Lager

Beschreibung

7'' Display für den Raspberry Pi mit Touchscreen 

Das einzige Display Modul, dass sich direkt an den DSI Verbinder auf der Raspberry Pi Platine anschließen lässt! Kompatibel mit allen Raspberry Pi's außer Zero & Zero W (diese haben nur einen Kamera-Verbinder).

Alle Information zur Verfügbarkeit findet Ihr in unserem Blogpost.

Hinweis: wir führen auch Gehäuse / Rahmen für dieses 7'' Display, beispielsweise von Pimoroni.

Anschlussanleitung Display: 

https://cdn.shopify.com/s/files/1/1560/1473/files/Display-howtoconnect.pdf?522

Ausstattung offizielles 7'' Raspberry Pi Display:

  • 800 x 480 Pixel Auflösung
  • Kapazitativer 10-Finger Touchscreen
  • Größe sichtbarer Bereich: 155 mm x 86 mm
  • Dimensionen: 194 mm x 110 mm x 20 mm

Lieferumfang:

  • Displaymodul
  • Adapterboard (Stromversorgung des Displays, Umwandung des parallelen Signals vom Display zum seriellen Port (DSI) des Raspberry Pis)
  • DSI Flach-Kabel (ribbon cable)
  • 4 x Abstandshalter und Schrauben zur Befestigung des Adapter Boards und des Raspberry Pis auf der Rückseite des Displays
  • 4 x Jumper Kabel (um das Display mit Strom vom Raspberry Pi aus zu versorgen) 

Vorteile:

  • Industriemodul
  • langfristig garantierte Verfügbarkeit (durch die Raspberry Pi Foundation)
  • Stromversorgung durch Raspberry Pi möglich (über GPIO Header)

Das Display wird nahtlos in Raspbian unterstützt, es benötigt keine speziellen Treiber. Der 10-Punkt Touch kann mit der entsprechenden Software (siehe Beispiele Raspberry Pi Foundation) bequem und präzise genutzt werden.

Tipps & Hinweise:

Per Software-Konfiguration ist eine Drehung der Bildschirmausgabe möglich, falls man das Display in einer anderen Orientierung einbauen möchte. 

Wir führen Zubehör-Gehäuse für das 7'' Display, und auch eine fertig aufgebaute Lösung auf Pi 3 und Display Basis, die Display T. Box 7.

Fazit

Das Display Modul der Raspberry Pi Foundation ermöglicht vielfältige Anwendungen, als interaktiver Kiosk, für Prototypen, zum Aufbau von eigenen Elektronik-Projekten mit komfortabler Ansteuerung und vielem mehr!

Es eignet sich durch sein hochwertiges Design besonders gut für professionelle Projekte, die die Komplexität von Computer-Interaktionen abstrahieren und dem Nutzer ein von Smartphones und Tablets her gewohntes Touchinterface bereitstellen. 

 

Hinweis neue EAN: 640522710829 nach Designwechsel

 

7'' Display for the Raspberry Pi with Touchscreen

The only display module that connects directly to the DSI connector on the Raspberry Pi board! Compatible with all Raspberry Pi's except Zero & Zero W (these have only one camera connector).

All availability information can be found in our blogpost.


Note: we also carry cases / frames for this 7'' display, for example from Pimoroni.

Connecting instructions display:

https://cdn.shopify.com/s/files/1/1560/1473/files/Display-howtoconnect.pdf?522

Features official 7'' Raspberry Pi display:

  • 800 x 480 pixel resolution
  • Capacitive 10-finger touchscreen
  • Size visible area: 155 mm x 86 mm
  • Dimensions: 194 mm x 110 mm x 20 mm

Scope of delivery:

  • Display module
  • Adapter board (power supply of the display, conversion of the parallel signal from the - display to the serial port (DSI) of the Raspberry Pi)
  • DSI flat cable (ribbon cable)
  • 4x spacers and screws to mount the adapter board and the Raspberry Pi on the back of the display
    4x jumper cables (to power the display from the Raspberry Pi)
  • 4x jumper cables (to power the display from the Raspberry Pi)

Advantages:

  • Industrial module
  • long-term guaranteed availability (through the Raspberry Pi Foundation)
  • Power supply from Raspberry Pi possible (via GPIO header)

The display is seamlessly supported in Raspbian, no special drivers needed. The 10-point touch can be used conveniently and precisely with the appropriate software (see Raspberry Pi Foundation examples).

Tips & Hints:

Per software configuration, it is possible to rotate the screen output if you want to mount the display in a different orientation.

We carry accessory cases for the 7'' display, and also a ready-built solution on Pi 3 and display base, the Display T. Box 7.

Conclusion

The display module of the Raspberry Pi Foundation allows a variety of applications, as an interactive kiosk, for prototypes, to build your own electronic projects with convenient control and much more!

It's high quality design makes it particularly suitable for professional projects that abstract the complexity of computer interactions and provide the user with a touch interface familiar from smartphones and tablets.



Note new EAN: 640522710829 after design change

Benötigen Sie Beratung oder ein Angebot zu diesem Artikel?

Customer Reviews

Based on 9 reviews
67%
(6)
22%
(2)
0%
(0)
11%
(1)
0%
(0)
W
Werner H. (Freising, DE)
7" Display Raspberry

Reibungslose Abwicklung - vielen Dank

c
christoph h. (Hamburg, DE)
Alles tip top

Bla

W
Wolfgang K. (Meitingen, DE)
Alles Bestens

Tolles Produkt, funktioniert einwandfrei!!

T
Thomas F. (Münster, DE)
Alles top!

Ware top, Preis top, Lieferung top.

T
TR (Heinsberg, DE)
Sehr gut

Ware wie beschrieben, fairer Preis, sofort lieferbar. Sehr schnelle Lieferung, ordentlich verpackt. Hier werde ich wieder kaufen!
Es gibt sicher bessere Displays mit höherer Auflösung, für meine Zwecke, Reperier Server am 3D Drucker, ist es aber bestens geeignet. Vor allem läuft es out of the box am Raspi.

Zuletzt gesehen