2.5 A Netzteil für Raspberry Pi (offizielles Netzteil, weiß, vier Köpfe)

SKU: a-psu4heads-2.5
MPN: T5875DV
EAN / Barcode: 0714838189430
Lieferfrist: Sofort versandfertig, Lieferfrist 1-2 Tage

Preis:
Angebotspreis11,00 €

Inkl. Steuern Versand wird an der Kasse berechnet

Lager:
Auf Lager

Beschreibung

2.5 A Netzteil für Raspberry Pi (offizielles Netzteil, weiß, vier Köpfe)

Das offizielle Netzteil für den Raspberry Pi! Empfohlen von der Raspberry Pi Foundation für stabilen Betrieb Deines Raspberry Pis.

Mit 2,5 A Strom bietet Dir dieses Netzteil genug Leistung um den Pi 3, und einiges an USB Peripherie zu betreiben. Es wird auf jeden Fall empfohlen, den Pi 3 mit einem hochwertigen Netzteil mit viel Leistung zu betreiben, da die CPU in Leistungsspitzen einiges an Strom ziehen kann.

Features:

  • kompatibel mit allen Raspberry Pi Modellen
  • 1,5 m microUSB B Kabel (fest am Netzteil eingebaut)
  • ErP Level 6 Efficiency Rating
  • 50.000 Stunden MTBF (Mean Time Between Failures, durchschnittliche Zeit bis zum Ausfallen)
  • vier austauschbare Köpfe für Anschluss in UK, EU, Australien, USA

Technische Daten Ausgang:

  •  Ausgangsspannung: +5,1 VDC
  • Mindestlast: 0 A
  • Nominelle Last: 2,5 A
  • Nominelle Ausgangsleistung: 13 W
  • Output Regulation: +/-5%
  • Line Regulation: +/-2%
  • Ripple & Noise: 120mVp-p Maximum
  • Rise Time: 100mS Maximum at nominal input
  • Turn-on Delay: 3 Seconds Maximum at nominal input
  • Schutz: gegen Kurzschluss, Überspannung, over current (zu hoher Strom)
  • Effizienz: 80.86%
  • Anschlusskabel: 1500 mm microUSB B 5 Pin Kabel

Technische Daten Eingang:

    • Eingangsspannungen Bereich: 90 - 264 VAC
    • Eingangsfrequenz: 47 - 63 Hz
    • Eingangsstrom: maximal 0.5 A
    • Inrush current: No damage and IP fuse will not blow
    • AC Inlet: UK, Euro, Aus & US changeable heads

    Technische Daten Sonstiges:

    • Abmessungen: 73,2 (L) * 45,1 (B) * 35,1 (H) mm
    • Gewicht: ca 150 g
    • Betriebstemperatur: 0° C bis 40 ° C
    • Lagertemperatur: -20 ° C bis +60° C
    • Luftfeuchtigkeit bei Betrieb: 20 ~ 85 % RH. Nicht-kondensierend
    • MTBF: 50.000 Stunden 

    Fazit

    Dieses Netzteil ist die solide Wahl, gerade auch für professionelle Anwendungen bei denen es auf eine hohe Stabilität und Zuverlässigkeit ankommt.

     

     

    2.5 A Power Supply for Raspberry Pi (official power supply, white, 4 head)

    The official power supply for the Raspberry Pi! Recommended by the Raspberry Pi Foundation for stable operation of your Raspberry Pi.

    With 2,5 A current this power supply offers you enough power to run the Pi 3, and some USB peripherals. It is definitely recommended to run the Pi 3 with a high quality power supply with plenty of power, as the CPU can draw quite a bit of current during performance peaks.

    Features:

    - compatible with all Raspberry Pi models
    - 1.5 m microUSB B cable (fixed to the power supply)
    - ErP Level 6 Efficiency Rating
    - 50,000 hours MTBF (Mean Time Between Failures)
    - Four interchangeable heads for connection in UK, EU, Australia, U.S.

    Technical Data Output:

    - Output voltage: +5.1 VDC
    - Minimum load: 0 A
    - Nominal load: 2.5 A
    - Nominal output power: 13 W
    - Output regulation: +/-5
    - Line Regulation: +/-2%
    - Ripple & Noise: 120mVp-p Maximum
    - Rise Time: 100mS Maximum at nominal input
    - Turn-on Delay: 3 seconds maximum at nominal input
    - Protection: against short circuit, over voltage, over current
    - Efficiency: 80.86%.
    - Connection cable: 1500 mm microUSB B 5 pin cable

    Technical data input:

    - Input voltage range: 90 - 264 VAC
    - Input frequency: 47 - 63 Hz
    - Input current: maximum 0.5 A
    - Inrush current: No damage and IP fuse will not blow
    - AC Inlet: UK, Euro, Off & US changeable heads

    Technical Data Other:

    - Dimensions: 73.2 (L) * 45.1 (W) * 35.1 (H) mm
    - Weight: approx 150 g
    - Operating temperature: 0 ° C to 40 ° C
    - Storage temperature: -20 ° C to +60 ° C
    - Operating humidity: 20 ~ 85 % RH. Non-condensing
    - MTBF: 50,000 hours

    Conclusion

    This power supply is the solid choice, especially for professional applications where high stability and reliability are important.

    Benötigen Sie Beratung oder ein Angebot zu diesem Artikel?

    Customer Reviews

    Based on 2 reviews
    100%
    (2)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    P
    Pierre-Antoine B. (Hamburg, DE)
    5/5

    2.5 A Netzteil für Raspberry Pi (offizielles Netzteil)

    D
    Dietmar H. (Berlin, DE)
    gut und schnell

    Alles hat so funktioniert wie es sollte, vielen Dank

    Zuletzt gesehen