Merkmale
- Treiber Chip: SSD1306
- Schnittstelle: 3-Draht SPI, 4-Draht SPI, I2C
- Auflösung: 128*64
- Display Größe: 0.96inch
- Farben: 1/4 gelber Bereich, 3/4 blauer Bereich
- Sichtbarer Winkel: >160°
- Betriebstemp.: -20~70
- Lagerung Temp.: -30~80
- Betriebsspannung: 3,3V / 5V
- Anwendbarkeit: Hardware-Plattformen wie Raspberry Pi/Jetson Nano/Arduino/STM32
Schnittstellen
| PIN Nummer | Symbol | Beschreibung |
| 1 | VCC | Spannungsversorgung positiv (3,3~5V Spannungseingang) |
| 2 | GND | Masse |
| 3 | NC | Öffner |
| 4 | DIN | Dateneingang |
| 5 | CLK | Taktsignaleingang |
| 6 | CS | Chipauswahl, low aktiv |
| 7 | D/C | Befehlssignal, Low-Pegel für Befehl, High-Pegel für Daten |
| 8 | RES |
Reset-Signal, low aktiv |
Hardware Konfiguration
| Modus/Schnittstelle | BS0/BS1 | DIN | SCK |
| 3-Draht-SPI | 1/0 | MOSI | SCLK |
| 4-Draht-SPI | 0/0 | SDA | SCL |
| I2C | 0/1 | SDA | SCL |
Entwicklungsressourcen
English Description
Features
Driver Chip: SSD1306
Interface: 3-wire SPI, 4-wire SPI, I2C
Resolution: 128x64
Display Size: 0.96 inch
Colors: 1/4 yellow area, 3/4 blue area
Viewing Angle: >160°
Operating Temperature: -20°C to 70°C
Storage Temperature: -30°C to 80°C
Operating Voltage: 3.3V / 5V
Compatibility: Hardware platforms like Raspberry Pi/Jetson Nano/Arduino/STM32
Interfaces
| Pin Number | Symbol | Description |
|---|---|---|
| 1 | VCC | Positive power supply (3.3~5V input voltage) |
| 2 | GND | Ground |
| 3 | NC | Normally open |
| 4 | DIN | Data input |
| 5 | CLK | Clock signal input |
| 6 | CS | Chip select, active low |
| 7 | D/C | Command signal, low level for command, high level for data |
| 8 | RES | Reset signal, active low |
Hardware Configuration
| Mode/Interface | BS0/BS1 | DIN | SCK |
|---|---|---|---|
| 3-Wire SPI | 1/0 | MOSI | SCLK |
| 4-Wire SPI | 0/0 | SDA | SCL |
| I2C | 0/1 | SDA | SCL |
Development Resources