Adafruit Feather 32u4 Basic Proto - compatible with Arduino

SKU: ada-2771
MPN: 2771
EAN / Barcode: 4060137021183
Delivery time: Ready for shipment immediately, delivery time 1-2 days

Price:
Sale price30,89 €

Tax included Shipping calculated at checkout

Stock:
In stock

Description

Adafruit Feather 32u4 Basic Proto - compatible with Arduino

Feather ist das neue Entwicklungsboard von Adafruit, und wie sein Namensvetter ist es dünn, leicht und lässt dich fliegen! Wir haben Feather entwickelt, um einen neuen Standard für tragbare Mikrocontroller-Kerne zu setzen.

Dies ist der Feather 32u4 Basic Proto, der eine Menge Platz für Prototypen bietet.

Das Herzstück des Feather 32u4 ist ein ATmega32u4, der mit 8 MHz getaktet ist und mit 3,3 V Logik betrieben wird - ein Chip-Setup, mit dem wir viel Erfahrung haben, da es dasselbe ist wie beim Flora. Dieser Chip hat 32K Flash und 2K RAM, mit eingebautem USB, so dass er nicht nur eine USB-zu-Seriell-Programm- und Debug-Fähigkeit hat, ohne dass ein FTDI-ähnlicher Chip benötigt wird, sondern auch wie eine Maus, eine Tastatur, ein USB-MIDI-Gerät usw. funktionieren kann. Dieser Chip wird von der Arduino-IDE gut unterstützt und kann so gut wie jeden Sensor/jede Bibliothek, die es gibt, ausführen.

Um die Verwendung für tragbare Projekte zu erleichtern, haben wir einen Anschluss für einen unserer 3,7-V-Lithium-Polymer-Akkus und eine integrierte Ladefunktion eingebaut. Sie brauchen keine Batterie, das Gerät läuft problemlos direkt über den Micro-USB-Anschluss. Wenn du aber einen Akku hast, kannst du ihn mitnehmen und dann zum Aufladen an den USB-Anschluss anschließen. Der Feather schaltet automatisch auf USB-Strom um, wenn dieser verfügbar ist. Außerdem haben wir die Batterie über einen Teiler mit einem analogen Pin verbunden, so dass Sie die Batteriespannung messen und überwachen können, um festzustellen, wann Sie eine Aufladung benötigen.

Hier sind ein paar praktische Daten!

  • Maße: 2,0" x 0,9" x 0,28" (51mm x 23mm x 8mm) ohne eingelötete Stecker
  • Leicht wie eine (große?) Feder - 4,8 Gramm
  • ATmega32u4 @ 8MHz mit 3,3V Logik/Stromversorgung
  • 3,3V-Regler mit 500mA Spitzenstromausgang
  • Native USB-Unterstützung, mit USB-Bootloader und Debugging über die serielle Schnittstelle
  • Sie erhalten außerdem eine Vielzahl von Pins - 20 GPIO-Pins
  • Hardware Seriell, Hardware I2C, Hardware SPI Unterstützung
  • 7 x PWM-Anschlüsse
  • 10 x analoge Eingänge (einer wird zur Messung der Batteriespannung verwendet)
  • Eingebautes 100mA Lipoly-Ladegerät mit Ladestatusanzeige-LED
  • Pin #13 rote LED für allgemeine Blinkzwecke
  • Power/Enable-Pin
  • 4 Befestigungslöcher
  • Reset-Taste

Der Feather 32u4 Basic Proto hat noch etwas Platz übrig, so dass wir Ihnen einen winzig kleinen Prototyping-Bereich zur Verfügung stellen. Wenn Sie nur einen Taster oder einen Sensor anbringen wollen, können Sie das auf einem Breadboard überspringen und direkt verdrahten.

Der Baustein wird komplett montiert und getestet geliefert und verfügt über einen USB-Bootloader, mit dem Sie ihn schnell mit der Arduino-IDE verwenden können. Wir haben auch einige Header beigelegt, so dass du sie einlöten und in ein lötfreies Breadboard stecken kannst. Die Lipoly-Batterie und das USB-Kabel sind nicht im Lieferumfang enthalten (aber wir haben viele Optionen im Shop, wenn Sie möchten!)

Schauen Sie sich unser Tutorial für alle möglichen Details an, einschließlich Schaltpläne, Dateien, IDE-Anweisungen und mehr!

 

 

Adafruit Feather 32u4 Basic Proto - compatible with Arduino

Feather is the new development board from Adafruit, and like its namesake it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores.

This is the Feather 32u4 Basic Proto, it has a bunch of prototyping space built right in.

At the Feather 32u4's heart is at ATmega32u4 clocked at 8 MHz and at 3.3V logic, a chip setup we've had tons of experience with as it's the same as the Flora. This chip has 32K of flash and 2K of RAM, with built in USB so not only does it have a USB-to-Serial program & debug capability built in with no need for an FTDI-like chip, it can also act like a mouse, keyboard, USB MIDI device, etc. This chip is well supported in the Arduino IDE and can run just about every sensor/library out there.

To make it easy to use for portable projects, we added a connector for any of our 3.7V Lithium polymer batteries and built in battery charging. You don't need a battery, it will run just fine straight from the micro USB connector. But, if you do have a battery, you can take it on the go, then plug in the USB to recharge. The Feather will automatically switch over to USB power when its available. We also tied the battery thru a divider to an analog pin, so you can measure and monitor the battery voltage to detect when you need a recharge.

Here's some handy specs!

  • Measures 2.0" x 0.9" x 0.28" (51mm x 23mm x 8mm) without headers soldered in
  • Light as a (large?) feather - 4.8 grams
  • ATmega32u4 @ 8MHz with 3.3V logic/power
  • 3.3V regulator with 500mA peak current output
  • USB native support, comes with USB bootloader and serial port debugging
  • You also get tons of pins - 20 GPIO pins
  • Hardware Serial, hardware I2C, hardware SPI support
  • 7 x PWM pins
  • 10 x analog inputs (one is used to measure the battery voltage)
  • Built in 100mA lipoly charger with charging status indicator LED
  • Pin #13 red LED for general purpose blinking
  • Power/enable pin
  • 4 mounting holes
  • Reset button

The Feather 32u4 Basic Proto has some extra space left over, so we give you a tiny little prototyping area. If you just need to attach a button or sensor, you may be able to skip out on a breadboard and wire it directly on there.

Comes fully assembled and tested, with a USB bootloader that lets you quickly use it with the Arduino IDE. We also toss in some header so you can solder it in and plug into a solderless breadboard. Lipoly battery and USB cable not included (but we do have lots of options in the shop if you'd like!)

Check out our tutorial for all sorts of details, including schematics, files, IDE instructions, and more!

 

Benötigen Sie Beratung oder ein Angebot zu diesem Artikel?

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Zuletzt gesehen