PiCAN FD with GPS/GNSS ublox NEO-M8M for Raspberry Pi

SKU: SKP-0038
EAN / Barcode:
Lieferfrist: Sofort versandfertig, Lieferfrist 1-2 Tage

Preis:
Angebotspreis114,99 €

Inkl. Steuern Versand wird an der Kasse berechnet

Lager:
Auf Lager

Beschreibung

Diese PiCAN FD Karte mit ublox NEO-M8M GPS/GNSS Empfänger. Die NEO-M8 Module nutzen den gleichzeitigen Empfang von bis zu drei GNSS-Systemen (GPS/Galileo zusammen mit BeiDou oder GLONASS), erkennen mehrere Konstellationen gleichzeitig und bieten eine hervorragende Positionierungsgenauigkeit in Szenarien, in denen Stadtschluchten oder schwache Signale beteiligt sind. Der Anschluss der Antenne erfolgt über einen SMA-Stecker.
Klassisches CAN und CAN FD wird durch den Microchip MCP2518FD IC bereitgestellt.

Einfach zu installierender SocketCAN-Treiber. Die Programmierung kann in C oder Python erfolgen.
Optionales 3A SMPS-Modul, das die PiCAN FD GPS/GNSS-Karte und den Raspberry Pi mit 7 bis 24 V externer Spannung versorgen kann.


CAN FD Merkmale

  • Microchip MCP2518FD CAN-Steuerung
  • Arbitrierungs-Bitrate bis zu 1Mbps
  • Daten-Bitrate bis zu 8Mbps
  • CAN FD Controller-Modi
    • Gemischter CAN 2.0B- und CANFD-Modus
    • CAN 2.0B-Betrieb
  • Hochgeschwindigkeits-SPI-Schnittstelle (10 MHz)
  • 120Ω-Abschlusswiderstand bereit
  • LED-Anzeige (GPIO04)
  • Vier Befestigungslöcher, entsprechen dem Pi Hat Standard
  • SocketCAN-Treiber, erscheint in der Anwendung als can0
  • Unterbrechung RX auf GPIO25
  • Fixierte Status-LED


NEO-M8M Merkmale

  • 72-Kanal u-blox M8-Engine GPS/QZSS L1 C/A, GLONASS L10F, BeiDou B1 SBAS L1 C/A: WAAS, EGNOS, MSAS Galileo-ready E1B/C
  • USB-C, I2C und UART-Kommunikation
  • SMA-Antennenanschluss
  • u-center Software kompatibel. Erfordert Windows PC über USB-C
  • Zeitimpuls-LED

Dokumente

 

English description 

This PiCAN FD board with ublox NEO-M8M GPS/GNSS receiver. The NEO-M8 modules utilize concurrent reception of up to three GNSS systems (GPS/Galileo togetherwith BeiDou or GLONASS), recognize multiple constellations simultaneously and provide outstandingpositioning accuracy in scenarios where urban canyon or weak signals are involved. Antenna connection is via a SMA connector.


Classic CAN and CAN FD is provided by the Microchip MCP2518FD IC. 

Easy to install SocketCAN driver. Programming can be done in C or Python.


Optional 3A SMPS module which can power the PiCAN FD GPS/GNSS board and Raspberry Pi from 7 to 24v external supply.

CAN FD Features
  • Microchip MCP2518FD CAN Controller
  • Arbitration Bit Rate u pto 1Mbps
  • Data Bit Rate upto 8Mbps
  • CAN FD Controller modes
    • Mixed CAN 2.0B and CANFD mode
    • CAN 2.0B mode
  • High speed SPI Interface (10 MHz)
  • 120Ω terminator ready
  • LED indicator (GPIO04)
  • Four fixing holes, comply with Pi Hat standard
  • SocketCAN driver, appears as can0 to application
  • Interrupt RX on GPIO25
  • Fix status LED

NEO-M8M Features

  • 72-channel u-blox M8 engine GPS/QZSS L1 C/A, GLONASS L10F, BeiDou B1 SBAS L1 C/A: WAAS, EGNOS, MSAS Galileo-ready E1B/C
  • USB-C, I2C and UART communication
  • SMA antenna connection
  • u-center software compatible. Requires Windows PC via USB-C
  • Time Pulse LED
Documents

Benötigen Sie Beratung oder ein Angebot zu diesem Artikel?

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Zuletzt gesehen