SYMBOL	DESCRIPTION
VCC	Spannungsversorgung positiv (3,3~5V Spannungseingang)
GND	Masse
DIN	Dateneingang
CLK	Taktdateneingang
CS	Chipauswahl, low aktiv
D/C	Daten-/Befehlsauswahl (high für Daten, low für Befehl)
RES	Reset-Signal, low aktiv

SYMBOL

DESCRIPTION

VCC

Spannungsversorgung positiv (3,3~5V Spannungseingang)

GND

Masse

DIN

Dateneingang

CLK

Taktdateneingang

Chipauswahl, low aktiv

D/C

Daten-/Befehlsauswahl (high für Daten, low für Befehl)

RES

Reset-Signal, low aktiv

Mode/Interface	BS0	CS	DC	DIN	CLK
4-wire SPI	0	Chip-Auswahl	Daten/Befehl	MOSI	SCK
I2C	1	NC	I2C-Adressauswahl	SDA	SCL

Mode/Interface

BS0

DIN

CLK

4-wire SPI

Chip-Auswahl

Daten/Befehl

MOSI

SCK

I2C

I2C-Adressauswahl

SDA

SCL

English Description

This is a general OLED display module, 1.5-inch diagonal, 128x128 pixels, 16-bit grayscale, with an embedded controller that communicates via SPI or I2C interface.

Features

128x128 high resolution
16-bit grayscale for better display effect
Supports SPI or I2C interface, configured via onboard resistor
Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)

Specifications

Driver chip: SSD1327
Interface: SPI / I2C
Resolution: 128×128
Display size: 1.5 inches
Color: White
Viewing angle: >160°
Dimensions: 44.50mm x 37mm
Operating voltage: 3.3V / 5V

Interface

SYMBOL | DESCRIPTION
VCC | Power supply positive (3.3~5V input)
GND | Ground
DIN | Data input
CLK | Clock input
CS | Chip select, active low
D/C | Data/command selection (high for data, low for command)
RES | Reset signal, active low

Hardware Config

Mode/Interface	BS0	CS	DC	DIN	CLK
4-wire SPI	0	Chip select	Data/Command	MOSI	SCK
I2C	1	NC	I2C address select	SDA	SCL

Documentation / Downloads:

https://www.waveshare.com/wiki/1.5inch_OLED_Module

Eigenschaften

Spezifikationen

Interface

Hardware Config

Dokumentation / Downloads

English Description

Features

Specifications

Interface

Hardware Config

Documentation / Downloads: